by Rob Williams on February 19, 2009 in AMD Processors
Phenom II may have just launched last month, but AMD didn’t want to waste time in following-up with their first AM3-based processors. We’re taking a look at two, including the X4 810 and X3 720 ‘Black Edition’. Both offer great performance at their respective price-points, but the X3 became the more appealing chip, thanks to its overclocking ability.
Generally speaking, the faster the processor, the higher the system-wide bandwidth and the lower the latency. As is always the case, faster is better when it comes to processors, as we’ll see below. But with Core i7, the game changes up a bit.
Whereas previous memory controllers utilized a dual-channel operation, Intel threw that out the window to introduce triple-channel, which we talked a lot about at August’s IDF. Further, since Intel integrates the IMC onto the die of the new CPUs, benefits are going to be seen all-around.
Before jumping into the results, we already had an idea of what to expect, and just as we did, the results seen are nothing short of staggering.
As far as I’m concerned, benchmarking for memory bandwidth is almost a moot point, because at some point, we hit a wall when the real-world benefits will stop being increased. In the case of AMD, their integrated memory controller avails us more than enough bandwidth, out-performing Intel’s entire Core 2 line-up with absolute ease. It falls a bit short of Intel’s triple-channel configuration, but that was to be expected. Again though, anything over 5,000MB/s is very unlikely to benefit a regular consumer.
The latency though, is far more important. The faster the instructions can get sent from the processor to the memory, and vice versa, the better. For the most part, no CPU here is truly lacking, except maybe the E5200 and X2 7750, as they have very high latencies. The rest of the results are fairly equal latency-wise across all Intel and AMD CPUs.
Sandra 2009 Multi-Core Efficiency
How fast can one core swap data with another? It might not seem that important, but it definitely is if you are dealing with a true multi-threaded application. The faster data can be swapped around, the faster it’s going to be finished, so overall, inter-core speeds are important in every regard.
Even without looking at the data, we know that Core i7 is going to excel here, for a few different reasons. The main is the fact that this is Intel’s first native Quad-Core. Rather than have two Dual-Core dies placed beside each other, i7 was built to place four cores together, so that in itself improves things. Past that, the ultra-fast QPI bus likely also has something to do with speed increases.
This test is where we can see huge differences between AMD’s and Intel’s CPUs, with Intel being the clear leader in both inter-core bandwidth and latencies. How much this matters in the grand scheme, but seeing as AMD’s offerings scale quite well in multi-threaded benchmarks, I’m assuming it’s not much. Still, it’s rather interesting to see such staggering differences between the architectures here.