As I have often said, the venerable PC chassis is the most overlooked part in the average PC builder’s shopping list. More often than not, the budget is pretty well spent when it comes time to make this purchase, yet the expected performance and style are often a lofty proposition. While the market has been producing some excellent budget cases, they are quite often lacking in key features. What is a builder to do?
Up to the plate steps one of the heavy hitters of the industry, Cooler Master. Having built up quite the batting average for producing some well-designed, yet budget-oriented cases brings the budget conundrum to its knees. Having built up a strong reputation for quality and customer service for over a decade, there seems no end in sight to their level of commitment to the game. With a strong focus on developing highly-efficient thermal solutions for us all, there is no doubt they will continue to give us hit after hit.
The original 690 debuted over two years ago and was a big hit with nearly everyone that crossed its path. It was very affordable, yet it was highly adaptable. Flexibility and ease of use were the strongest features. It was able to take on chassis’ at twice the price and beat them hands down in almost every aspect. If anything bad could be said, it was that it was TOO budget oriented and lacked any real flash or extras. But, no one can deny that it was a winner and a solid player.
Just over two years later we have in front of us the next generation of the chassis, 690 II Advanced. There are four levels of trim for this release which are the 690 II, 690 II with window, the 690 II Advanced, and 690 II Advanced with window. Cooler Master has sent us the Advanced windowless model for our testing pleasure. While sporting a direct resemblance to its older sibling, the differences are not hard to spot. This time around there is some flash to go along with the function. Let’s take a peek into the box and see if Cooler Master has hit another home run with the 690 II.
My initial impression once unwrapped and on the examination table was one of surprise as much as excitement. The 690 II Advanced is an almost uncanny reproduction of the original. Don’t get me wrong, there are some big changes and such, but the overall appearance is very close. Cooler Master did an excellent job working within the boundaries of what a sequel should be and pulled it off nicely. The entire front panel is open mesh for excellent airflow. The chrome pinstripes flank the trademark CM badge.
Possibly the biggest and most welcome change is seen up top. The entire I/O panel has been moved here. From right to left we have: power button, reset button, USB, microphone, headphone, USB, e-SATA and the power button for the front fan’s blue LED lighting. Directly behind is the sliding door that covers the S-ATA docking port. Moving even further back showcases the wide open top which has a single 140mm fan residing beneath. There is room for another fan as well.
Sliding back the door reveals a simple yet very effective external S-ATA dock. Since the top panel is made of plastic, there is no worries about any electrical shorting. Fitting a drive is a snap and after running a few quick tests, I am happy to report there is absolutely no speed penalty when using the dock. While it may not be used on a constant basis, it is an excellent idea and most helpful when moving large quantities of data off a drive you do not wish to install internally. One important note is that the dock is self-powered, so there is nothing to but slide the drive into the receiver to get to work.
On to the left side panel you get two stamped mounting points for fans. Anywhere from an 80mm up to a 140mm fan can be mounted in either opening. This is a great feature for adding additional airflow over hot peripherals, although the upper mounting is unable to be used when you have a tall CPU cooler installed.
To the rear we have a standard bottom PSU mount arrangement. A single 120mm exhaust fan resides here as well as dual water cooling pass through holes capable of supporting 1/2″ ID tubing with ease. Also note that the entire panel is painted to match.
On to the right panel there is not a whole lot to see other than the venting provided behind the CPU area. You do get the option to mount a 80mm fan here and I can verify that it is possible to use a 25mm deep fan as well. While it may not be necessary to put one here, for those that can never have too many fans, it is a nice option to have.
Down below on the bottom we see again the rampant use of venting. The power supply gets lots of fresh air drawn in from below as the large rubber feet keep it well spaced. Next, the rest of the case floor is open which does allow a few interesting cooling options. Since the internal HDD cage is removable it is quite possible to internally mount a dual 120mm water cooling radiator down here on the inside. Also note the mesh filter type cover to help with dust control.
Wire management is a breeze on the 690 II. With large openings sporting double-rolled edges for safety, there is an abundance of choice when routing wiring and cabling. All HDD’s mount with their business ends facing this way, and again, there is plenty of room for all the required cables.
There are plenty of stamped slots to here as well for securing down with zip ties. This is a very simple yet extremely effective method of getting this job done and I wish ALL cases made would come this way. This makes a tough job easy and makes it look easy to get a tough job done.
A closer look at the rear of the HDD area puts into perspective just how well-thought-out all this cable managing is. When the original 690 came out, it was able to beat out cases that cost twice as much since it too had some effective routing. It’s nice to see that Cooler Master not only remembered this fact, but also improved upon it.
With the ability to install up to 7 3.5″ HDD’s internally, even the most die-hard storage nut will have all the room required. We are also given a nice little 2.5″ adapter that neatly and securely holds two 2.5″ drives for those that are already adopting SSD drives into their systems. Sliding out the drive caddies is a simple push of the tab and out she comes. Take note that the bottom part of the caddy (which holds 5 drives) is removable to open up access on the floor for alternative cooling methods.
Up above we see the simple yet effective tool-less mounting mechanisms for your 5 1/4″ drives. A quick flip of the switch and your drive is locked into place. I would have preferred to see them on the other side as well, but the job does get done and you are provided screws to use to hard mount just in case you prefer that method.
I wanted to highlight the mesh filtering that is present on the case floor. It is not overly required but it is a nice touch since there are more and more people worrying about cleanliness. It is a simple affair to pull it out for cleaning so there is no doubt this is a very useful feature.
Thumbscrews abound as the PCI expansion slots are also a tool-less design. I’d also like to point out the entire inside is painted to match the outside which has become VERY popular as of late. The rear 120mm fan is quiet yet effective and is of the standard 3-pin motherboard header style plug. There is also a Molex adaper for those who need it.
Looking upwards we see the single included 140mm exhaust fan which also sports a 3-pin motherboard header style power plug and four pin Molex adapter as well. Note the ability to go to dual 120mm fans as well as dual 140mm fans. This also opens up the flexibility to mount water-cooling radiators up here as well. Can you say options upon options?
With a firm tug, the front panel comes off revealing the final included case fan. This clear 140mm fan also sports blue LED lighting that can be turned off with the push of a button. Flexing its option muscles yet again, you see that there are many ways to mount your fan as well as change down to a 120mm fan should you desire.
I don’t normally highlight this area in my reviews but I wanted to this time for the simple fact that there are no damn leftover metal chunks left behind covering the 5 1/4″ bay slots. This is a big personal pet peeve of mine as I find it quite annoying to have to rip them off to get them out of the way to start my build. Thanks to Cooler Master for just getting rid of them for us.
The box of goodies that is included with every 690 II Advanced chassis includes a pair of rails to adapt a 3.5″ external device into one of the 5 1/4″ bays, a large VGA support bracket capable of holding the largest VGA cards, a pile of zip ties, along with various pieces of mounting hardware. I, for one, appreciate the fact that there is even a motherboard speaker included in the package. Chalk that up as yet another not necessary but damn nice part to have when building your dream PC.
Overall the 690 II Advanced is one impressive package with an even more impressive set of credentials. Over and over I was surprised by just how much you get for your money. Let’s get some parts installed and see just how well it performs.