Latest News Posts

Social
Latest Forum Posts

Gigabyte GA-X48T-DQ6
Bookmark and Share

gigabyte_x48t_dq6_review_logo.jpg
Print
by Rob Williams on May 19, 2008 in Intel Motherboards

Building a new machine and want DDR3 support? Then the X48T-DQ6 should be up for consideration. It offers great performance, very stable high overclocks (500MHz) and lots of connectivity, including a full eight USB ports at the back. The layout is not ideal, but the board still proves good overall.

System: HD Tach RW/3 & Sandra Memory Tests

HD Tach R/W 3

Simpli Software’s HD Tach RW is a superb storage benchmarking tool, that’s now free for everyone to use. It’s great for benchmarking removable storage or internal storage, such as hard drives, which is what we use it for here. Since we are testing a hard drive with an OS installed, we run read tests only, as write tests would overwrite important information.

 

 

Differences so small, it almost hurts to contemplate them.

SiSoftware Sandra XII

Sandra has been in my virtual toolbox for quite some time, and the reason is simply the fact that it includes many different types of synthetic benchmarks and makes for a great all-in-one. The two tests we will be focusing on is the Arithmetic and Multi-Media, however, as they are both CPU-specific.

In the Arithmetic test, the application stresses the CPU to find the maximum ALU instructions per second and floating point operations per second, in millions. In the Multi-Media test, a similar stress is executed to find the maximum int and float instructions per second.

 

 

 

 

Surprisingly, memory is one area where differences are seen between boards. In this case, both the P5E3 Premium and Maximus Extreme excel, in both bandwidth and latency. The other boards hover around the same. Overall though, these differences are all rather small and would show little difference in real-world tests (as we’ve seen).