Techgage.com

Techgage.com (http://forums.techgage.com/index.php)
-   Reviews and Articles (http://forums.techgage.com/forumdisplay.php?f=23)
-   -   Hiper Anubis Mid-Tower (http://forums.techgage.com/showthread.php?t=2694)

Rob Williams 11-22-2007 02:33 AM

Hiper Anubis Mid-Tower
 
Who do you run to when you need a new chassis? Antec? Thermaltake? SilverStone? Today, we are adding a new company to our personal list: Hiper. If their Anubis mid-tower had to be summed up in a single word, it would be "Quality". Not too bad for their first showing!

You can read Greg's full review here and discuss it here.

madmat 11-22-2007 09:25 AM

Seeing that monster in the flesh, I have to say that I'm really impressed with it. Now, if HiPer would put as much effort into their PSU's I'd really be impressed.

tate 12-04-2007 02:05 AM

I was wondering if you can modify the top of the case to install a Koolance EHX – 1000 Internal Radiator? I really like the look of the case but I already have my cooling.

Merlin 12-04-2007 07:24 AM

7.2" x 3.2" x 16.3" (18.2cm x 8cm x 41.4cm) radiator
Case is 20.6" 8.0" x 18.7"
So you would be covering the on off buttons and the connections

madmat 12-04-2007 08:39 AM

Plus the top of the case is extruded aluminum (heat sink style) so you'd have a lot of fun cutting it down to fit the Koolance thing up there. Me I'd just get a good double 120mm fan radiator and a Swiftech radbox and hang the rad from the rear of the case.

Greg King 12-04-2007 01:15 PM

I tell you what though, that would be a VERY nice look if you could mill out the top fins to fit a rad... even a single 120mm radiator would look nice sitting flush with the fins. Although, it would still sit up thanks to the fan so scratch that idea.

madmat 12-04-2007 03:03 PM

Nah, you'd sandwich the top in between the rad and the fan. The rad up top and the fan underneath the top inside the case. It would be fine that way but the top might need to be re-anodized.

Greg King 12-04-2007 03:13 PM

I am pretty sure that there would be significant clearance issues with the power supply as the fan is situated towards the rear of the case.

madmat 12-04-2007 03:44 PM

You lose the top 5.25" bay, use a single 120 rad (the PA160 is about as effective as a dual 120 rad) and mount it between the buttons and the PSU.


All times are GMT -4. The time now is 04:17 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2005 - 2014, Techgage Networks Inc.