Western Digital VelociRaptor 600GB

by William Kelley on May 24, 2010 in Storage

Solid-state may be the future of our storage, but for now, the prices for the latest SSD’s (even value models) is still far too high on the $/GB scale. For those looking for mass storage and still-great speeds, mechanical storage is still on top, and WD’s latest VelociRaptor’s, which utilize SATA 3.0, sit comfortably above all the rest.

Synthetic: Iometer & HD Tune Pro

Iometer 2006.07.27

Originally developed by Intel, and since given to the open-source community, Iometer (pronounced “eyeawmeter”, like thermometer) is one of the best storage-testing applications available, for a couple of reasons. The first, and primary, is that it’s completely customizable, and if you have a specific workload you need to hit a drive with, you can easily accomplish it here. Also, the program delivers results in IOPS (input/output operations per second), a common metric used in enterprise and server environments.

The level of customization cannot be understated. Aside from choosing the obvious figures, like chunk sizes, you can choose the percentage of the time that each respective chunk size will be used in a given test. You can also alter the percentages for read and write, and also how often either the reads or writes will be random (as opposed to sequential). I’m just touching the surface here, but what’s most important is that we’re able to deliver a consistent test on all of our drives, which increases the accuracy in our results.

Because of the level of control Iometer offers, we’ve created profiles for three of the most popular workloads out there: Database, File Server and Workstation. Database uses chunk sizes of 8KB, with 67% read, along with 100% random coverage. File Server is the more robust of the group, as it features chunk sizes ranging from 512B to 64KB, in varying levels of access, but again with 100% random coverage. Lastly, Workstation focuses on 8KB chunks with 80% read and 80% random coverage.

Because these profiles aren’t easily found on the Web, with the same being said about the exact structure of each, we’re hosting the software here for those who want to benchmark their own drives with the exact same profiles we use. That ZIP archive (~3.5MB) includes the application and the three profiles in an .icf file.

HD Tune Pro 3.5

HD Tune has long been one of our favorite storage benchmarks, thanks in part to its ease-of-use and its ability to deliver consistent results (which is obviously important). Like Iometer, no partition is created on the drive while benchmarking with this application, as the write tests will not work any other way. There are absolutely no performance gains from not having a partition, as HD Tune does its thing below the file system level during its write tests.

For our tests with HD Tune, we use both the “Benchmark” and “File Benchmark” (the latter is available in the Pro version only), as the latter gives us a bit more control over file sizes. From the Benchmark section, we gather both the read and write Min/Avg/Max results, and also the access time, and for the File Benchmark section, we run a file length of 1MB and 64MB, and record the results from the 4KB, 64KB, 512KB and 1MB chunk sizes.

Iometer continues to show it will point out any weakness in a drive. After many retests I came up with the same conclusion. While still far faster than all other 7200RPM drives it was not able to beat the 300GB variant. Overall the 600GB VR was the victor in HD Tune showing that it does have what it takes to stay on top.