Mushkin 2GB XP2-8500

Print
by Rob Williams on December 13, 2006 in Miscellaneous

It’s been a few months since we’ve had the opportunity to play with a Mushkin kit, but we now have their XP2-8500 on the hotseat. We compare its performance to Super Talents and Kingstons top kits to see who comes out on top.

Page 2 – Testing Methodology & Technical Details



Because these are from Mushkins performance line, we should expect some great results in our testing. PC2-8500 is somewhat of an odd number, as it results in DDR2-1066 speeds, the same as Corsairs modules released earlier this year. As I mentioned, we are dealing with 5-5-4-12 timings, which is tighter than the standard 5-5-5-15 that I have seen everywhere else.

Mushkin recommends 2.2-2.3v for these and after initial testing I found that MemTest for Windows would only become error free with 2.3v. Depending on your hardware and luck, 2.2v may be quite feasible for you. Of course I didn’t keep stock speeds for very long. I first tested both DDR2-800 and DDR2-900 and also my theoretical maximum overclock of DDR2-1100. As mentioned in my recent memory reviews, my 4600+ is lackluster in that DDR2-1100 is the most I can push out of ram, since moving into the 2.80GHz area is sketchy, and will bring on errors in any benchmark after a long run. 2.76GHz on the other hand proves 100% stable, so I stick to it for our max overclocks.

I will be comparing these modules to my Kingston PC2-8000 and Super Talent PC2-8000 kits, which both use Micron D9GKX chips… the cream of the crop. These Mushkins however use the lesser binned D9GMH chips. The primary differences between each of these two chips is minor… one is clocked for 333MHz and the other for 400MHz. The GKX chips cost more and tend to increase prices of the end modules. This has not really been a problem lately though, as GMH and GKX is priced similarly on the market simply depending on the overall stock speed of the modules in question.

Both of these chips are amazing, there’s no question about that. So, don’t take my DDR2-1100 overclock as being the max capable. I am sure with a killer CPU, all of the modules I have around would be pushed at least to DDR2-1200 speeds, which is becoming a norm in the enthusiast community. That said, here are the settings I chose for benchmarking.

  • DDR2-800 4-4-4-12 1.9v (2.40GHz)
  • DDR2-904 4-4-4-12 2.0v (2.71GHz)
  • DDR2-1000 4-5-4-15 2.2v (2.50GHz)
  • DDR2-1108 4-4-4-12 2.4v (2.76GHz)

One thing you may be asking yourself is, “Does this guy believe in even numbers?” and the answer is no. That aside though, the DFI M2R/G motherboard has FSB options in multiples of 2, therefore 275FSB is not possible, but 274 or 276 is. When I run into a spot where I’d like an odd number, I just use the next best setting. In that case, our max overclock was accomplished using 276FSB and a 10x multiplier.

The system we are using for testing:

  • AMD X2 4600+ EE 2.4GHz – 2.76GHz
  • DFI LanParty NF590 M2R/G
  • Mushkin 2GB PC2-8500
  • ASUS 256MB 7900GT
  • Seagate Barracuda 7200.10 320GB
  • Corsair HX620W
  • Corsair Nautilus 500 Water Cooling
  • NZXT Adamas Chassis
  • Samsung 18x DVD+RW, 4 120MM fans (One used for ram cooling)

Regardless of what product we are benchmarking, our testing machine goes through optimizations before we begin. All testing is performed on a stand-alone version of Windows XP Professional with SP2. System services not needed are closed down, in addition to unwanted programs in the system tray. Computer is cleaned up of scrap files, which includes emptying of the recycle bin. Directly before any testing occurs, the OS hard drive is defragged using Diskeeper 2007 Professional. Finally, we assure that the computer has adequate cooling and airflow.

As I mentioned, I will be using also the Super Talent 2GB PC2-8000 and Kingston HyperX 2GB PC2-8000 for comparisons sake. The results from both kits were used from earlier reviews using the same setup. However, since the Mushkin kit uses a stock speed of 1066MHz, I re-tested that speed on both of these kits. As usual, since we are running all of the kits of ram at the same speeds, we don’t expect either one to come out on top. The goals are to make sure the modules in question can keep up to what’s standard.


Support our efforts! With ad revenue at an all-time low for written websites, we're relying more than ever on reader support to help us continue putting so much effort into this type of content. You can support us by becoming a Patron, or by using our Amazon shopping affiliate links listed through our articles. Thanks for your support!

Rob Williams

Rob founded Techgage in 2005 to be an 'Advocate of the consumer', focusing on fair reviews and keeping people apprised of news in the tech world. Catering to both enthusiasts and businesses alike; from desktop gaming to professional workstations, and all the supporting software.

twitter icon facebook icon instagram icon