Arctic Cooler Freezer 64 Pro

[PAGETITLE=Introduction] Cooling is of great concern to most of us in the computer enthusiast community. Heat is the greatest enemy our computers face aside from the random spilt Red Bull onto an open motherboard. But who really does that? /Hangs head. Today we have the Arctic Cooling Freezer 64 Pro to look at. Arctic Cooling has been in the computer game for some time. They were started in 2001 in Switzerland and currently have offices in Hong Kong with production facilities in Asia. That's a fair amount of growth in 5 years I would say. They make premium cooling solutions for video cards and CPU alike and also manufacture computer cases too. They are widely known for their quality so it's my job to see how their newest cooler stacks up to the rest. This is basically an enhanced version of their previous A64 cooler, the Freezer 64. While the original Freezer was good, it could have been improved on and thats just what Arctic Cooling did. This time around, they focused on noise and added cooling. Before we get to the packaging and cooler itself, lets take a look at the specs of this cooler provided by Arctic Cooling themselves. Packaging The packaging of this cooler is nice and to the point, a small, square, black package with the Arctic Cooling logo on all of the sides. Once open, we see the cooler packaged snug in a plastic housing. Also on top are instructions as well as a small case badge for those of you that like others to know what you are packing. All right, we now have a good feel for what is included in the packaging, let's take a closer look at the actual cooler and see what is so special about the AC Freezer 64 Pro. Once outside of the box, we can see the cooler close up and take a look at each feature individually. The first thing I notice, aside form the size, is the 6 heat pipes. There are 3 pipes on either side of the base that run vertically up through the metal fins and stick out of the top of the cooler. These are what will carry the heat away from the CPU and into the fins to dissipate the heat efficiently. Moving on from the heat pipes, we notice that there is a thermal paste all ready applied to the copper base of the cooler. This first reminded me of the many AMD stock coolers that have a similar paste applied to them. I almost removed this and applied my own AS5 but decided that I would give this a go and see what it had to offer. Upon further review, Arctic Cooling has developed this thermal paste on their own and has named it MX-1. MX-1 differs from AS5 in that it contains no metal particles that could lead to a short if it were to come into contact with any other parts of your PC. This doesn't concern me much as I am careful, as I am sure you are as well, but good to know none the less. For good measure and to help AC promote their thermal paste, here are their test results. Now I don't know how exact these results are but they are for an Athlon XP. I also notice that there is no comparison between the MX-1 and some good old AS5. This really isn't a huge deal as I have all ready decided that I am going to use the MX-1 so I will move on with the review. There are 42 fins in the cooler with the lowest three being curved at the end so you can move some air over your RAM or your voltage regulators on your motherboard. As said earlier, the heat pipes, run vertically up through the fins and out the top of the last fin. The face of the cooler is flat with a single groove running up the sides of the fins. These grooves allow the fan assembly to clip right onto the cooler. As you can see in the above pictures, the 92mm fan is build onto the housing and on either sides of the fan, there are little flat prongs that clip into the grooves on the sides of the cooler and snap firmly into place. Two nice features that I noticed, and used, were the ability to rotate this cooler so it is blowing in one the four possible locations as well as mounting it to my stock mounting brackets. To install your cooler, all you have to do is install it like you would a stock heat sink and your set. You can also turn your cooler 90, 180 and 270 degrees. This is done by removing one screw and setting up the locking toggle on whatever side you would like it to be on. For me, I chose to have the fan blow towards the back of the case into the exhaust fan on the back of my case. Here is a nice picture of the lone screw that needs to be removed to set up the direction your fan will be blowing. [PAGEBREAK] [PAGETITLE=Testing and Conclusion] To test this cooler out, I am placing it in my everyday PC. The specs of this PC are as follows: Processor - AMD 3700+ San Diego 1MB L2. Motherboard - DFI LanParty Ultra - D. Video Card - eVGA 7800 GT. Power Supply - Ultra X-Finity 500W PSU. Memory - 512 x 2 Crucial Ballistix. Hard Disk - 1 WD Raptor 74 GB / Seagate 160 GB. Sound Card - Creative Audigy ZS2. OS - Windows XP Pro / SP2. This is the setup that I have used for all my other reviews and this review will not be any different. To test this cooler out, I will record the temperatures of my CPU idle and under load. To get to full load, I will run CPU Burn-in as well as encode a movie. This ought to be slow. The side panel will be closed on my case as well. /Drumroll. The results are along the lines of what I expected. I am at idle, around 30*C and at load, I am right at 36*C. From my other reviews, this cooler would rate right up there with the Zalman 7000Cu and that is not a bad cooler either. Conclusion With all this said, there isnt a whole lot that I can pick out that I do not like about this cooler. I would like to point out that the noise is not what I had expected from a 92mm fan. This was silenced by four rubber nipples that the fan casing mounts directly onto. A better example can be seen in the following picture. There were a lot of nice features about this cooler that can allow me to recommend this to anyone looking for a high performance to price ratio. At only 34.99 at Newegg, you can't go wrong with this cooler. It performs almost as good as the Zalman 9500 and costs half as much as the Zalman does. This is a good cooler and I can recommend this with out reservations to anyone out there who is unsatisfied with their current cooling solution. Pros Cheap ($35 US) Great cooling solution for s939. Quiet. Not silent, but quiet. East to mount. Pre applied MX-1 thermal paste. Cons Big and bulky. No fan controller to limit fan speed. All in all, this is a solid cooler that merits a 9/10 on our near famous scale. This will make you happy. Period. Many thanks to Arctic Cooling, who once again, has allowed us to review one of their fine products. Keep up the quality work. If you wish to discuss this article, please feel free to make your comments in our forums!

Arctic Cooler Freezer 64 Pro

Page 170 –